Measure the coating resistance:
The resistivity meter for coatings or PRM is used to measure the coating resistance in electrostatic sprays, thus optimizing the quality of the spraying process.
To measure resistance, put the probe in the paint or coating, just passing the hole on the side.
After pressing the button, the measurement starts.
The PRM is easy to use and maintain.
Optimizing the measurement process:
After a short time, the meter will show the final resistance value. The range between 10kilo-ohm and 20mega-ohm is determined fully automatically.
The PRM will automatically turn off within a short time – thus saving battery power.
The electrode is easy to remove from the probe; thoroughly clean the probe and electrode for later usage.
